How to count the circumference of the synchronous wheel.The circumference of the synchronous wheel also refers to the pitch length of the synchronous wheel. The pitch length of the synchronizing wheel is the value obtained by multiplying the pitch of the synchronizing wheel by the number of teeth of the synchronizing wheel. This value is the pitch length of the synchronizing wheel, that is, the circumference of the synchronizing wheel.
What are the forms of damage to the synchronous wheel?
1.If the tension force in the synchronous wheel transmission system is insufficient, the friction force of the belt body will also be relatively insufficient, and slippage will occur along with it. As a result, the wear of the timing belt becomes large and the synchronous wheel loses the transmission. The ability to load, and the drive loses stability, will allow the number of synchronized gears to be transmitted.
2.Because the synchronizing wheel is subjected to too much tension, the timing belt is seriously deformed, and the service life of the timing belt is also reduced.
3.If there are other dirt and other dirt on the timing belt, you need to immediately clean it. This is because the stowage material may contain chemical substances that allow it to enter the synchronizing wheel, thereby destroying the composition of the material structure of the synchronizing wheel.
What are the failure modes of synchronous wheels?
1.If you use a row of synchronous wheels of different length, then each of the synchronous wheels will experience different tension. In this way, some synchronizing wheels will produce a phenomenon of slippage or a situation in which the tension is too large, thereby causing the phenomenon of wear of the synchronizing wheel. Therefore, we must choose the same model, the same size of the synchronization wheel.
2.If the synchronization wheel is placed for a long time, the wheel will have an aging phenomenon that will affect the service life of the synchronization wheel, and it will also cause the synchronization wheel to change its shape.
3.If there is a dusty environment or acidic gas and alkaline gas at the operating site of the synchronous wheel, the belt of the timing belt will be damaged, and the service life of the timing belt will be reduced.